Find the best driving school for you
Oops! Unable to proceed
Please search City before proceeding further.
RTO Exam
LL Test Question
Learning licence test questions for learner’s licence are in the multiple-choice format, where you need to choose the correct answer from the options given for each question. . In the learners test or LL test , there are 15 multiple choice questions asked . You need to answer 9 questions correctly to clear the test. You get 30 seconds to answer each question.
To crack the RTO exam its important to practice properly. Here is the list of driving licence test questions for learner’s licence.
The driving licence test questions for a learner’s licence are based on the traffic rules and regulations. Test for learning licence check your theoretical knowledge about road safety and traffic rules.
Once you complete the test, you will know whether you have cleared or failed your test. If you have correctly answered the required number of driving licence test questions for a learning licence, the RTO will issue your licence. In case you have failed the test, you can reappear for it in one week.
In order to prepare for these driving licence test questions, you can practice sample questions from the mock test for RTO exam section.
You can practice RTO exam for free here. People are practicing learning license test questions to increase their chances of passing the theory test on the very first attempt. Practice multiple times to cover all 500+ learners test questions in our question bank for free.
Read More
Read Less
Questions
Road Signals
1. You are intending to turn left , you should position your vehicle at
the left hand lane
on the shoulder of the road
the middle lane
no need to position
2. You are in a wrong lane while approaching a busy Junction you should
show signal and cut across
shift lane
continue in that lane
stop until other lane is cleared
3. When going straight ahead at a round about
use hazard warning lamp
blow horn
indicate right signal and then left signal
No signals is required
4. You must not reverse your vehicle
on a bridge
on a busy road
on a one way road
Both 2 & 3
5. When do you reverse from a side road in to a main road
at any time
legally not permitted
only if both roads are clear and empty
permitted with signal
6. When approaching from the rear, where two lanes of traffic have stopped at a signal, you should
stop any where
try to overtake them
pass all the vehicle and stop in front of them
stop behind the last vehicle in the appropriate lane
7. Rear Mirror is slightly curved to
judge the speed of following vehicle
see face correctly
give a wider field of vision
cover the blind spot totally
8. Noise pollution may result in
disturbing mental equilibrium
Disturbing the concentration of the driver
may cause headache
All of these
9. Air pollution affects
Human beings only
plants and animals only
Momuments
All of these
10. Fitment of multi toned horns on a motor vehicle is
an offence under the law as it causes noise pollution
for avoiding accident
permitted only in emergency
for safe driving
Traffic Police Hand Signals
Mandatory Signs
Cautionary Signs
Informatory Signs
Traffic Light Signals
Road Marking
To stop vehicles approaching simultaneously from front and behind.
Warning signal closing all vehicles
To start vehicle approaching from left
To start vehicles coming from right
To change for the sign
To start one sided vehicles
To start vehicles on T-Point
To give salute to the VIP
To Control vehicles on T-Point
Straight Prohibited or No Entry
One Way
One Way
Prohibited in both directions
Motor Vehicles Prohibited
Trucks Prohibited
Bullock and Hand cart Prohibited
Bullock cart Prohibited
Horse cart Prohibited
Hand Cart Prohibited
Cycles Prohibited
Pedestrian Prohibited
Right Turn Prohibited
Left Turn Prohibited
U Turn Prohibited
Overtaking Prohibited
No Horn
No Parking
Stopping Prohibited
Speed Limit (50 km/hr)
Vehicle Width Limit
Vehicle Height Limit
Vehicle Length Limit
Load Limit
Axle Load Limit
Mandatory Bus Stop
Road Ends here
Only for Cyclist
Blow Horn Compulsorily
Compulsory Keep Left
Compulsory Turn Left
Compulsory Right Turn
Compulsory Ahead or Right Turn
Compulsory Ahead or Take Left
Compulsory Ahead
STOP
Give Way
Left Hand Curve
Right Hand Curve
Right Hair PIn Bend
Left Hair Pin Bend
Right Reverse Bend
Left Reverse Bend
Steep Ascent
Steep Descent
Narrow Road Ahead
Road Widens Ahead
Narrow Bridge
Slippery Road
Loose Gravel
Cycle Crossing
Pedestrian Crossing
School Ahead
Men At Work
Cattle
Falling Rocks
Ferry
Cross Road
Gap in Median
Side Road Right
Side Road Left
Y- Intersection
Y- Intersection
Y- Intersection
T- Intersection
Staggered Intersection
Staggered Intersection
Major Road Ahead
Round About
Dangerous Dip
Hump or Rough Road
Barrier Ahead
Unguarded level Crossing (200 m)
Unguarded level Crossing (50-100 m)
Guarded level Crossing(200 m)
Guarded level Crossing(50-100 m)
Re-assurance sign
Destination sign
Destination sign
Direction Sign
Place Identification Sign
First Aid Post sign
Public Telephone Sign
Petrol Pump Sign
Hospital Sign
Resting Place Sign
Eating Place Sign
No Thorough Road Sign
NO Thorough Side Road SIgn
Park This Side Sign
Parking both Sides Sign
Parking for Scooters and Motor cycles Sign
Flood Gauge
STOP : Stop well before the stop line, and don’t crowd the intersection. This not only obstructs a clear view of the intersection for other road users, but also make the zebra crossing unsafe for the pedestrians. You are allowed to turn left at the red signal unless there is a sign specifically forbidding you to do so. When turning, yield the right of way to pedestrians and vehicles from other directions.
Amber Light :The Amber light gives time to vehicles to clear the road when the signal is changing from green to red. If caught in the Amber signal in the middle of a large road crossing do not press your accelerator in panic but do continue with care.
Fleshing Red :You must come to a complete stop, yield to all other traffic and to pedestrians. Proceed only when the way is clear.
GREEN ARROW SIGNAL :To proceed with caution in the direction the green arrow points. Remember to yield to all pedestrians and vehicles already in the intersection
GO :If first in line, do not go tearing off at the green signal but pause to see whether vehicles from other directions have cleared the road. Sometimes you are allowed to turn left or right too, unless separate signs exist for each direction. if turning, yield the right of way to pedestrians and vehicles from other directions.
Flashing Yellow :To slow down and proceed with caution
Bare roads:Bare roads will lead to total vehicular confusion. Markings are painted on the road to direct, guide and regulate the road user. Road markings include all lines patters, words and colours applied on or attached to the road surface or curb, for the said purpose
On undivided two-way roads, the center line separates the opposing streams of traffic and facilitates their movements. The center line can be a single broken line, a single continuous solid line (barrier line), a double solid line or a combination of solid line and broken line. Single and double solid lines, whether white or yellow, must not be crossed or even straddled.
Traffic Paints:Traffic paints are commonly used for road markings. Other materials such as, road studs, cat's eyes and thermoplastic strips also find their application in road markings. These markings promote road safety and ensure smooth flow of traffic. Sometimes, road markings are used to supplement the message of road signs and other devices
Double Continuous lines are used where visibility is restricted in both directions. Neither stream of traffic is allowed to cross the lines.
Centre barrier line marking for a six lane road. On undivided roads with at least three traffic lanes in each direction, the centre line marking shall consist of a double solid continuous line .
Border or Edge Lines: These are border lines as they tell the driver till which edge can he drive safely. These lines are usually drawn on the edge of the carriageway.
Centre barrier line marking for a four lane road:On undivided roads with at least two traffic lanes in each direction, the center line marking shall consist of a single solid continuous line of 150 mm wide with lane markings of 1.5 m segments and 3 m gaps
Combination of solid and broken lines:If you are on the side of the broken line, then you can cross the line, provided it is safe and not dangerous to do so. You should never cross the line if the line happens to be continuous and not a breaking one
Give Way Line:A double dotted slanting line is observed at road junctions and this is the give way line. You will also find a red reverse triangle on this sign. It allows the traffic to move on the main road.
Lane Line:The division of the carriageway into separate lanes for traffic traveling in the same direction on either side of the center-line or median strip helps to promote travel in proper lanes and curb the meandering tendency of the drivers, thus promoting safety and ensuring maximum capacity. Traffic lane lines are broken lines which permit lane changing with caution. The traffic lane lines shall be normally be single broken lines.
Parking Prohibited Lines:A no-parking sign either on a continuous yellow line on the kerb or on the edge, means that much area is the no-parking zone.
Pedestrian Crossings:Pedestrian crossings are also called zebra lines for there are black and white stripes painted parallel to the road. Pedestrians are expected to follow the traffic lights and cross only at these points. The drivers have to stop at these signs to allow the pedestrians to pass. These markings are important and the drivers have to respect them for they grant the right of passing or moving or crossing the road to pedestrians.
Stop Line:A stop line is one which you find before a road intersection. This stop line is usually a lone solid slanting line. Here is where you need to stop at the instructions of the duty traffic police. The traffic signals are also located on this line. Usually, the pedestrian crossing is also marked at this juncture but the stop line will be before the crossing to facilitate the pedestrians.
White Lines:White markings are used to indicate carriageway markings. If restrictions have to be indicated, then yellow markings are used. If you find white or yellow together and painted along with black lines, then they mean these are kerb markings or object markings.
Yellow Box Junctions or Keep Clear:Yellow box junctions are yellow diagonal lines within a small box. It means that the drivers can pass it only if there is enough space ahead of this junction. In no ways, can a driver stop at this marking, even if it means stopping for a brief period of time.